18-56 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
Read Remote V35
Purpose: Reads and displays the V.35 settings from the remote Access Bank II at the far end of
the Access Navigator’s DS1. The Access Bank II must be operational to read its
settings. The command displays a message similar to the following.
Security: Level 3 (monitor)
Syntax: read remote <n> v35
Example: read remote 9 v35
Message:
V35:
datainv: normal
clkinv: none
cts: high
rxclk: internal
speed: nx64
dsu: Off
length: 4
Description:
Field Description
n DS1 number, 1 to 32.
Item Description
datainv Data polarity inversion: normal, invert
clkinv Clock polarity inversion: none, invert
cts Clear to Send signaling: always high, always low, follow cd,
follow rts
rxclock Receive clock source: internal, external
speed Data speed (Kbps): Nx56 or Nx64, where N is length (number of
DS0s)
dsu V.54 Data Service Unit (DSU) loopcode detection: on, off
length Number of DS0s assigned, 0 to 32