Filter
Top Products
10-22 August 2003 Access Navigator - Release 1.8
Provision GR-303 Service
Provision “Drop” DS1 Circuits to Subscriber
3. Set DS1 type to “drop” with the following command:
set ds1 <n> type drop
Example: set ds1 9 type drop
NOTE: The Access Navigator provides GR-303 to SLC-96/TR-08 translation for Shelf
A, B, C, or D when the drop DS1 framing is set to "slc96".
A drop DS1 providing GR-303 to TR-08 translation must use “slc96” FDL protocol for
Shelf A and “none” for Shelf B, C, and D. A remote Access Bank I/TR-08 can operate as
Shelf A, B, C, or D. An Access Bank II requiring TR-08 translation must operate as Shelf
B, C, or D.
Remote provisioning of an Access Bank II requires “esf” framing and “cafdl” protocol.
4. Set drop DS1 frame type to D4, ESF, or SLC-96 with the following command:
set ds1 <n> framing <d4|esf|slc96>
Example: set ds1 9 framing esf
5. Set drop DS1 line code to AMI or B8ZS with the following command:
set ds1 <n> linecode <ami|b8zs>
Example: set ds1 9 linecode b8zs
6. Set drop DS1 circuit ID with the following command:
set ds1 <n> id <"id">
Example: set ds1 9 id "CA ds1 #9"
The ID may contain up to 30 characters and must be enclosed in quote marks.
NOTE: DS1 clock must be set to “normal” for normal operation.
7. Set drop DS1 clock source to normal or loop with the following command:
set ds1 <n> clock <normal|loop>
Example: set ds1 9 clock normal