Filter
Top Products
15-6 August 2003 Access Navigator - Release 1.8
Diagnostics & Troubleshooting
Configuration Change Log
Syntax: log ds1 <n>
Displays only DS1 alarms.
Syntax: log ds1 <n> <major|minor|alert|info>
Displays only DS1 alarms with a specified severity level.
Syntax: log equipment
Displays only equipment alarms.
Syntax: log equipment <major|minor|alert|info>
Displays only equipment alarms with a specified severity level.
Syntax: log info
Displays only informational events.
Syntax: clear log
Erases all data in the log file.
Configuration Change Log
The Access Navigator maintains a log of the most recent 500 configuration changes in a separate log
file, which can be displayed using the CLI log config command (see Log Config on page 18-41).
Filtering options allow the user to display selected events. The Access Navigator also records the
Management Interface causing the change – CLI, EOC, SNMP, or ICC (inter-controller commands).
Syntax: log config
Displays all configuration log events.
Syntax: log config ds0 <n:ch>
Displays only the configuration management events affecting a DS0 channel or range
of channels.
Syntax: log config ds1 <n>
Displays only the configuration management events affecting a DS1 or range of DS1s.
Syntax: log config crv <value>
Displays only the configuration management events affecting a CRV or range of
CRVs.
Syntax: log config source <cli|eoc|snmp|icc>
Displays only the configuration management events from a management interface.
Syntax: clear config log
Erases all data in the configuration change log file.