Access Navigator - Release 1.8 August 2003 18-131
CLI Language Reference
CLI Command List
Set SNMP TrapCom
Assigns a Trap-Community string (trapCommunity) to the Access Navigator SNMP interface. This
is the user name reported with each trap message for authentication.
Security: Level 2 (operator)
Syntax: set snmp trapcom <"setting">
Example: set snmp trapcom "public"
Set Switch Type
Purpose: This command identifies the switch type used for GR-303 operation and specifies the
managed object classes that the Access Navigator must support. This command applies
to all Access Navigator items managed over the GR-303 EOC. To see the current
setting, see Show Switch on page 18-154.
Security: Level 2 (operator)
Syntax: set switch type <5ess|dms|generic>
Example: set switch type 5ess
Field Description
"setting" The trap-community name is a text string up to 32 characters
long, and may use any combination of letters and numbers.
Settings must be enclosed in quote marks.
Field Description
5ess Set switch type to Lucent 5ESS.
dms Set switch type to Nortel DMS.
generic Set switch to generic type (Telcordia generic TR-303
specification, Supplement 3 EOC definition)