Filter
Top Products
Access Navigator - Release 1.8 August 2003 18-127
CLI Language Reference
CLI Command List
Security: Level 2 (operator)
Syntax: set remote <n> v35 speed <56|64>
Example: set remote 9 v35 speed nx64
Set Screen
Purpose: Sets the number of lines in the terminal display screen before the message pauses. If
you enter the number of lines in the display screen, the CLI messages will
automatically pause at the bottom of the screen to prevent data from scrolling off the
screen. The CLI will print --More-- at the bottom of the screen to indicate that there is
more data to be displayed.
Use the following keys to display more of the message.
l Press Space key to advance message by one full screen.
l Press Tab key to advance message by two lines.
l Press Enter or Return key to advance message by one line.
l Press Escape key to cancel remainder of message.
NOTE: The factory default setting is 24 text lines. If messages scroll off the
screen, either adjust the window size on your computer or use the set screen
command to set the number of text lines returned by the CLI.
Security: Level 3 (monitor)
Syntax: set screen <height|off>
Example: set screen 32
Field Description
n DS1 number, 1 to 32.
56 Selects N times 56 Kbps speed, where N is number of DS0s
assigned.
64 Selects N times 64 Kbps speed, where N is number of DS0s
assigned.
Field Description
height Height (in text lines) of terminal screen display. Defualt is 24.
off Disables screen pause feature