Carrier Access Access Navigator Network Router User Manual


 
Access Navigator - Release 1.8 August 2003 18-115
CLI Language Reference
CLI Command List
Syntax: set ds1 <n> termid <id>
Example: set ds1 5 termid 2
Set DS1 Threshold
Purpose: Sets the threshold levels for performance monitoring. This command lets the user to set
the threshold and measurement interval for each error type. (Status DS1 Performance
on page 18-162 for descriptions of error types.)
NOTE: To disable threshold checking for a DS1 or error type, set its
threshold value to zero.
Security: Level 2 (operator)
Syntax: set ds1 <n> threshold <interval> <errortype> <value>
Example: set ds1 9 threshold day uas 1000
Example: set ds1 5-8 threshold hour cv 120
Field Description
n DS1 number, 1 to 32.
id Termination ID, 1 to 28. IDs used by the GR-303 switch must all
be different.
Field Description
n DS1 number, 1 to 32, or range of numbers such as 5-8.
interval Measurement time period: <day|hour|min15>
day – 1 day
hour – 1 hour
min15 – 15 minutes
errortype Error type: <cv|es|ses|sefs|dm|uas>
cv – Line Code Violations
es – Errored Seconds
ses – Severely Errored Seconds
sefs – Severely Errored Frame Seconds
dm – Degraded Minutes
uas – Unavailable Seconds
value Maximum number of errors allowed during measurement
interval. Exceeding this value will log a threshold crossing event.