Carrier Access Access Navigator Network Router User Manual


 
Access Navigator - Release 1.8 August 2003 18-33
CLI Language Reference
CLI Command List
Delete User
Purpose: This is a Level 1 command that allows a network manager to delete user names and
deny access to the Access Navigator by login on through the Command Line Interface.
NOTE: Because there must be at least one Level 1 user, the CLI will send
an error message if anyone attempts to delete all Level 1 users when there are
still users defined at other levels.
Security: Level 1 (manager)
Syntax: delete user <"name">
Example: delete user "bill"
Disconnect
Purpose: Removes crossconnects created by the connect command. To change existing DS0
connections, you must first disconnect them before making new connections.
Security: Level 2 (operator)
Syntax: disconnect <n:ch>
Example: disconnect 25:1-24
Field Description
name User names can be up to 10 characters long, and may use any
combination of letters and numbers. No spaces or special
characters are allowed. Names are not case sensitive. Upper case
(capital letters) will be converted to lower case letters before
being processed. The name must be enclosed in quotes if it
contains spaces..
You can display a list of all use names with the command Show
Users on
page 18-155.
Field Description
n DS1 number, 1 to 32.
ch DS0 number, 1 to 24, or a range of numbers such as 5-8.