Carrier Access Access Navigator Network Router User Manual


 
18-10 August 2003 Access Navigator - Release 1.8
CLI Language Reference
Online Help
Online Help
n Help System Overview ... 18-10
n Displaying Basic Commands ... 18-10
n Context Sensitive Help ... 18-11
n Printing the Help File ... 18-13
Help System Overview
Online help for CLI commands is available any time you are logged into the Access Navigator. You can
display basic commands and obtain context sensitive help with additional detail. You can also print the
entire help file to the terminal screen for reference.
Online help describes only those commands available to your access level. The help is updated with
each release of the Access Navigator operating system software. If you experience any difficulty with
a CLI command, use the online help to display the latest command descriptions and examples.
NOTE: Online help may describe commands that will be rejected because they depend
on other conditional command settings. Commands may also be rejected because they
require software options not supported by the installed software, in which case the CLI will
return the message “That command not supported in this product”.
Displaying Basic Commands
To display a list of basic CLI commands, just type the symbol ? You can also type the word help and
press the Enter or Return key on the terminal. The Access Navigator will respond with a message similar
to the following, which shows only the first few commands.
Command Line Interface Help. For immediate context help type ? at any time.
For command sensitive help, type "help" before any partial command.
Note: Anything listed in brackets <> are variables set by the user.
Commands:
aco ...................... Activate Alarm Cut Off.
add ...................... Create interfaces, attributes and users.
alarms ................... Displays the active alarms.
clear .................... Clears specified information.
connect .................. Create 2-way connections
between DS0s or fractional groups of DS0s.
delete ................... Delete items created by add commands.
disconnect ............... Remove connection created by connect command.
exit ..................... Log out of the CLI.
load ..................... Download software.
log ...................... Displays the Event Log.
ping ..................... Send ping request to a remote IP device
via the ethernet port.
print .................... Print to the screen