Carrier Access Access Navigator Network Router User Manual


 
18-38 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
Example: load tftp config 192.168.118.65 "AN26"
Log
Purpose: Displays log events. The Access Navigator maintains a log of the most recent 400
alarms and informational events.The log file will be erased by a power interruption,
clear log command, reset command, or restore defaults command. Log
records are useful because they show both when an event occurred and when it was
cleared. (For a detailed description of these messages, see Alarm Clearing on
page 14-1.)
NOTE: The Access Navigator will start recording events when first powered
up. Consequently, the recorded time and date will start with initial values of
00:00:00 01/01/1998 and will continue until the user sets a new time and date.
Security: Level 3 (monitor)
Syntax: log
Displays all log events except BERT, TMC and Configuration change events.
Syntax: log <major|minor|alert|info>
Displays only alarms with a specified severity.
Syntax: log ds1 <n>
Displays only DS1 alarms.
Syntax: log ds1 <n> <major|minor|alert|info>
Displays only DS1 alarms with a specified severity level.
Syntax: log equipment
Displays only equipment alarms.
Syntax: log equipment <major|minor|alert|info>
Displays only equipment alarms with a specified severity level.
Syntax: log info
Displays only informational events.
file File name used to save the configuration data. The file and
optional path must be enclosed in quotes, as in
"C:\CONFIG\AN26". The default path is the root directory of the
TFTP server.
blocksize Transmission block size (optional), 512 to 8192. The default is
8192 bytes.
Field Description