18-24 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
Each remote port has a maximum number of DS0s that can be assigned to the fractional
interface.
The Access Navigator processes the interface DS0s as voice and data signals. Voice
traffic uses robbed bit signaling, while data traffic is clear channel.
Security: Level 2 (operator)
Syntax: add interface <"name"> <n:ch> <type>
Example: add interface "AcmeT1" 9:13-18 voice
Example: add interface "AcmeV35" 10:19-24 data
Remote Port Maximum Number of DS0s
RS-232 1
SDSL 16
T1 Drop 24
V.35 24
Field Description
name A user defined name describing the interface. The name is a text
string up to 18 characters long, and may use any combination of
letters and numbers. No spaces or special characters are allowed.
The name must be enclosed in quote marks.
n DS1 number, 1 to 32.
ch DS0 number, 1 to 24, or a range of numbers such as 5-8.
type Type of interface. See table below.
Type Description
data Data
gr303 GR-303 voice
remote Remote (See Connect Remote Interface on
page 18-31)
voice Voice