Carrier Access Access Navigator Network Router User Manual


 
Access Navigator - Release 1.8 August 2003 13-3
Provision Remote Adit 600 via IP DS0
IP DS0 Management Configuration
IP DS0 Management Configuration
IP DS0 management can be used with T1 Type 2 facilities lacking FDL capability. This scheme uses an
external colocated Ethernet/T1 router, such as an Adit 600 with Adit Router card installed. The router sends
IP management and provisioning commands over a DS0 management channel to the remote Adit 600. This
enables both the Network Operations Center and the Access Navigator to communicate with the remote Adit
600. The management DS0 also carries control messages for ISDN BRI and P-Phone applications.
The Access Navigator crossconnects the management DS0 in the groom DS1 to a drop DS1 going to the
remote Adit 600. The IP DS0 management channel must be carried by a DS1 connected to one of the two
T1 ports on the remote Adit 600 Controller card. The following figure shows a typical IP addressing scheme
for managing several remote Adits.
NOTE: To provision IP DS0 management, it is necessary to configure the Access
Navigator, remote Adit 600, and colocated Adit Router. This manual includes Quick
Guides for all three products. For detailed information, refer to the Adit 600 User Manual
and Adit Router User Manual.
NOTE: P-Phone support requires the following minimum software versions:
Access Navigator: release 1.8 or higher
Adit 600 Controller (colocated) : release 5.0 or higher
Adit 600 Controller (remote) :release 6.0 or higher
IP Router card: release 1.5 or higher
Terminal Server Router (TSR) card: release 1.0 or higher
Customer Media Gateway (CMG) Router card: release 1.1 or higher
Figure 13-2 Carrier Access IP DS0 Management Configuration
DS1 STATU S
ACCESS
NAVIGATOR
CARRIER ACCESS
CORPORATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
POWER
ACO
(PUSH)
CON T ROL LER A
ACTIVE
CRIT
ACO
MAJOR
MINOR
POWER
ACO
(P US H)
CONTROLLER B
ACTIVE
CRIT
ACO
MAJOR
MINOR
Adit 600
DS1 1
DS0 24
Adit 600
Access
Navigator
Network
Operations
Center
Management
Console
On-Net
Location
Customer
Premises
Ad it 6 00
Ethernet
Hub
DS1 24
DS0 24
Ad it 6 00
DS1 25
DS0 1
l
l
l
IP = X.X.X.1
IPDS0 = X.X.X.1
Static DS0 Management
Connnections between
Groom and Drop DS1s
l
l
l
IPDS0 = X.X.X.24
Adit 600
Adit 600
IP
Router
(colocated) (remote)
(remote)
Up to 24
Remote Adits
Groom
DS1
Drop DS1s