Filter
Top Products
18-142 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
PPHONE Call
Connection
ENABLED, DISABLED. This setting is enabled by the Set DS1
Remote Device Mgmt on
page 18-113.
FDL Type NONE, SLC96 (DDL), T1403 (ANSI T1.403). Switch DS1 FDL
type is always None.
Send Code P2E11, P2E15, P2E23, QRSS. (Does not appear unless a code is
being sent.
Performance Thresholds See table below
Performance
Thresholds
Description
unavailable seconds (UAS) The number of seconds that the interface is unavailable.
The DS1 interface is said to be unavailable from the onset of 10
contiguous SESs, or the onset of the condition leading to a
failure. If the condition leading to the failure was immediately
preceded by one or more contiguous SESs, then the DS1
interface unavailability starts from the onset of these SESs.
While the interface is deemed unavailable, the only count that is
incremented is UASs.
severely errored
seconds
(SES) For ESF links, the number of one-second intervals
containing 320 or more Path Code Violation Error Events OR
one or more Out of Frame defects OR a detected AIS defect.
For D4 signals, the number of one-second intervals with Framing
Error events, or an OOF defect, or 1544 LCVs or more.
Controlled slips are not included in this parameter.
SES is not incremented during an Unavailable Second.
errored seconds (ES) For ESF links, the number of one-second intervals
containing one or more Path Code Violations OR one or more
Severely Errored Frame defects OR one or more Controlled Slip
events OR a detected AIS defect.
For D4 links, the presence of Bipolar Violations also triggers an
Errored Second.
ES is not incremented during an Unavailable Second.
sev. errored frame
seconds
(SEFS) The number of one-second intervals containing one or
more Out of Frame defects OR a detected AIS defect.
Item Description