Filter
Top Products
Access Navigator - Release 1.8 August 2003 18-129
CLI Language Reference
CLI Command List
Set SNMP Location
Purpose: Assigns a system location (sysLocation) to the Access Navigator SNMP interface. This
is a text description or code indicating the location of the network element. Codes such
as the 11-character Telcordia (Bellcore) Common Language Location Identifier
(CLLI) are often used to specify equipment locations. For example, the code
DNVRCO1A201 could represent equipment located in Denver, Colorado, in
equipment rack location 1A201.
Security: Level 2 (operator)
Syntax: set snmp location <"setting">
Example: set snmp location "DNVRCO1A201"
Set SNMP Name
Purpose: Assigns an system name (sysName) to the Access Navigator SNMP interface for
network management. This name or identification code is used to describe the network
element.
Simple Network Management Protocol (SNMP) enables network operations centers
(NOCs) to monitor and manage network elements across an internetwork. The Access
Navigator supports SNMP through its Ethernet port. The following CLI commands are
used to set up the Access Navigator for access by the carrier’s TCP/IP management
network.
Security: Level 2 (operator)
Syntax: set snmp name <"setting">
Example: set snmp name "Acme Corp AN#2"
Field Description
"setting" The location is a text can be up to 255 characters long, and may
use any combination of letters and numbers. Settings must be
enclosed in quote marks.
Field Description
"setting" The name is a text string up to 255 characters long, and may use
any combination of letters and numbers. Settings must be
enclosed in quote marks.