Filter
Top Products
17-10 August 2003 Access Navigator - Release 1.8
Update Controller Card Software
Download Configuration
Download Configuration
This step is optional and will restore the uploaded Access Navigator configuration settings if
accidentally lost for any reason.
CAUTION! CONFIGURATION FILES ARE NOT COMPATIBLE BETWEEN DIFFERENT
SOFTWARE VERSIONS (INCLUDING FEATURE OPTIONS SUCH AS DCS, GR-303, OR P-
P
HONE). SERVICE DISRUPTIONS CAN OCCUR IF A CONFIGURATION FILE CREATED BY
ONE SOFTWARE VERSION IS DOWNLOADED TO AN ACCESS NAVIGATOR RUNNING A
DIFFERENT VERSION.
CAUTION! THE ACCESS NAVIGATOR MUST BE RESET AFTER USING THE LOAD
CONFIGURATION COMMAND. THIS WILL TEMPORARILY DISRUPT SERVICE.
1. Load current configuration settings with the following command:
load tftp config <ipaddress> <"file">
Example: load tftp config 192.168.118.65 "AN26"
CAUTION: This command needs to be followed by a system reset.
Failure to do so could result in unpredictable results.
Do you really want to load the configuration flash (y/n)? y
0131088 bytes transferred
Configuration download complete.
Please do a 'reset all' at this time.
.
2. Reset Access Navigator with the following command:
reset all
Example: reset all
Do you really want to reset (y/n)? y
Field Description
ipaddress IP address where configuration file is to be stored. (This is the IP
address of the TFTP server.) IP address has format
xxx.xxx.xxx.xxx, where xxx is a number from 0 to 255.
file File name used to save the configuration data. The file and
optional path must be enclosed in quotes, as in
"C:\CONFIG\AN26". The default path is the root directory of the
TFTP server.
blocksize Transmission block size (optional), 512 to 8192. The default is
8192 bytes.