Carrier Access Access Navigator Network Router User Manual


 
12-2 August 2003 Access Navigator - Release 1.8
Provision Remote Adit 600 via FDL
Remote Adit 600 FDL Provisioning Overview
Remote Adit 600 FDL Provisioning Overview
This procedure covers remote management and provisioning of Carrier Access’ Adit® 600 TDM Customer
Service Terminals. The Adit 600 TDM provides six service card slots that support up to 18 T1s (DS1s) per
unit, up to 48 voice channels, or any combination of voice and data services.
The Access Navigator / GR-303 + Data Host and GR-303 Host with P-Phone can both serve as a host for
remote Adit 600 terminals, providing GR-303 voice concentration and data grooming. In addition to
providing the user with remote management of the Adit 600, the Access Navigator requires a management
link to the Adit 600 to process ISDN BRI calls through the Adit 600.
There are two management configurations:
l FDL Management – sends CLI commands over the DS1’s ESF Facility Data Link (FDL)
l IP DS0 Management – sends IP management commands over a DS0 channel in the DS1. This IP DS0
management configuration is required to support P-Phone service using an Access Navigator /
GR-303 Host with P-Phone. See Provision Remote Adit 600 via IP DS0 on page 13-1.
Figure 12-1 Adit 600 Voice and Data Services with FDL Management
T1
Access
Bank II
Access
Navigator
Network
Operations
Center
Access
Navigator
Element
Manager
Voice
Switch
FDL
On-Net
Location
Customer
Wiring Closet
Local
Management
CLI/RS-232
CLI/Telnet
SNMP
Data
Switch
TCP/IP
Network
Customer
Premises
Key System
Fax
V.35, T1
or DSL
Router
Ethernet
PBX
Stations
Voice
Lines
ACCESS BA NK II
Tip & Ring
-48Vdc
Return
Grou n d
T1
Span 1
T1 Test 2
T1 Test 1
T1
Span 2
V. 35
DCE
V. 35
Status
RS23 2
Data
Adit 600
Key System
Fax
Router
Ethernet
PBX
Stations
Modem
FXS/FXO
10/100BaseT
ADIT 6 00
DDS
ISDN BRI
T1 Drop
V.35
RS232
VoIP
T1 Drop