Carrier Access Access Navigator Network Router User Manual


 
Access Navigator - Release 1.8 August 2003 18-107
CLI Language Reference
CLI Command List
The application affects the permissible DS1 Type, Framing, Line Code, FDL, and
Remote Management selections.
NOTE: For remote management description of an Access Bank II or Adit 600
TDM terminal, see Set DS1 Remote Device Mgmt on page 18-113.
Security: Level 2 (operator)
Table 18-3 Application Configuration Requirements
Permissible Selections
Application DS1
Type
DS1
Framing
DS1 Line
Code
DS1
FDL
Remote
Mgmt
Voice to GR-303 switch Switch ESF B8ZS None None
Voice or data to DCS switch Groom D4 or
ESF
AMI or
B8ZS
None None
Voice or data to subscriber
drop
Drop D4 AMI or
B8ZS
None None
Voice or data to subscriber
drop
Drop ESF AMI or
B8ZS
None or
T1403
None
Adit 600 TDM (FDL mgmt)
(controller management DS1)
Drop ESF B8ZS None CA FDL
Adit 600 TDM (FDL mgmt)
(all other DS1s point to
controller management DS1)
Drop ESF B8ZS None DS1 <n>
Adit 600 TDM (IP mgmt)
(controller management DS1)
Drop D4 or
ESF
B8ZS None CA IP
Adit 600 TDM (IP mgmt)
(all other DS1s point to
controller management DS1)
Drop D4 or
ESF
B8ZS None DS1 <n>
Access Bank II
(not remotely provisioned)
Drop D4 or
ESF
AMI or
B8ZS
None None
Access Bank II
(remotely provisioned)
Drop ESF B8ZS None CA FDL
Access Bank I/TR-08 or
SLC-96/TR-08 (Shelf A)
Drop SLC96 AMI or
B8ZS
SLC96 None
SLC-96/TR-08
(Shelf B, C, D)
Drop SLC96 AMI or
B8ZS
None None