Carrier Access Access Navigator Network Router User Manual


 
Access Navigator - Release 1.8 August 2003 18-27
CLI Language Reference
CLI Command List
Clear BERT Log
Purpose: Erases all data in the BERT log file, which records error counts.
Security: Level 3 (monitor)
Syntax: clear bert log
Clear Blocked Call Count
Purpose: Sets the blocked call count to zero (see Status TMC on page 18-173).
Security: Level 3 (monitor)
Syntax: clear blocked call count
Clear Config Log
Purpose: Erases all data in the configuration change log file, which records changes to the system
configuration for each management interface.
Security: Level 3 (monitor)
Syntax: clear config log
Clear DS1 Performance
Purpose: Clears only the performance data for the specified Access Navigator DS1, setting all
error counters back to zero. This command does not reset the interval timer, so that new
errors will only be accumulated for the remainder of the “current” 15 minute interval.
This may affect the totals shown for the “previous” 15 minute, 1 hour, and 1 day
intervals. The interval timer is only reset by a power-on reset or reset all command.
Security: Level 3 (monitor)
Syntax: clear ds1 <n> performance
Example: clear ds1 9 performance
Severity Severity of the event (major, minor, alert).
Description Message describing the event.
Field Description
n DS1 number, 1 to 32
Item Description