Filter
Top Products
18-36 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
After sending the load command, the CLI will respond with a series of status messages.
Message:
Transmission complete.
Programming flash . . .
Software update succeeded.
tftp Download software via Internet TFTP.
The Controller update software file must be located on a TFTP
file server accessible by both the Telnet management terminal
and the Access Navigator. Trivial File Transfer Protocol (TFTP)
allows a file to be sent over a network by specifying the server IP
address and file name or path name. Using an RS-232 or Telnet
management session, the operator sends a load tftp command
to the Access Navigator, specifying the location of the TFTP
server and update file. TFTP server capabilities, including time-
out settings, must match the bandwidth of the network being
used. Depending on the file size and network speed, the file
transfer may take several minutes.
active Upgrade active Controller card.
standby Upgrade standard Controller card.
ipaddr IP address where software update file is stored. IP address has
format xxx.xxx.xxx.xxx, where xxx is a number from 0 to 255.
file File name including path used to locate the update software.
Carrier Access software file names are shortened for
compatibility with PC and UNIX systems. For example, a
Carrier Access part number for GR-303 software such as 019-
0050 version 1.72 would be shortened to 0050172.303.
Similarly, DCS software 019-0051 version 1.72 would be
shortened to 00510106.DCS. Software providing different
feature options will have different part numbers.
Field Description