Filter
Top Products
Adjacent Host
Displays a screen for defining an adjacent host route. Adjacent hosts are systems on
a locally-attached network. Select Adjacent Host when the network or a particular
host does not respond to ARP requests.
UDP Checksum Off
Enables or disables UDP checksum processing for the network interface.
Default: No
No
Enables checksum processing to provide backward compatibility with UNIX BSD 4.1.
Yes
Disables checksum processing.
UDP/TCP
Dest Port (high)
Sets the upper boundary of the range for filtering a UDP or TCP destination port.
Options
Set the Protocol parameter to Ignore to disable the filtering of UDP and TCP ports.
Leave this field blank and enter the destination port number in the UDP/TCP Dest
Port (low) field if you are filtering a single UDP or TCP destination port.
Enter the highest port number if you are filtering a range of UDP or TCP
destination ports.
Leave this field blank and enter the name of an IP port list in the UDP/TCP Dest
Port (low) field if you want to use an IP port list to establish the lower and upper
range of UDP or TCP destination ports.
For more information, refer to “UDP/TCP Dest Port (low)” later in this chapter. To
learn how to create a Port list, refer to “Port (low)” and “Port (high)” earlier in this
chapter.
UDP/TCP
Dest Port (low)
Sets the lower boundary of the range for filtering a UDP or TCP destination port.
Options
Set the Protocol parameter to Ignore to disable the filtering of UDP and TCP ports.
Enter the port number in this field and leave the UDP/TCP Dest Port (high) field
blank if you are filtering a single UDP or TCP destination port.
Enter the lowest port number in this field and enter the highest destination port
number in the UDP/TCP Dest Port (high) field if you are filtering a range UDP or
TCP ports.
If you want to use an IP port list to establish a range of UDP or TCP destination
ports, enter the name of the IP port list in this field and leave the UDP/TCP Dest
Port (high) field blank.
Internet Protocol
(IP) Parameters
7
Internet Protocol (IP) Parameters
Parameters and Options
7-29