HP (Hewlett-Packard) 200 Network Router User Manual


 
Rgetis: Displaying the IPX Servers (SAP) Table
Use NCL’s Rgetis command to format and display the IPX Service
Advertising Protocol (SAP) table for either this router or a remote HP or
Wellfleet router that is running IPX.
Syntax
rgetis [X.X.X.X] [community]
[X.X.X.X] (optional) is the IP address of the local or remote
router in dotted decimal notation. If you omit this field, an IP
address on the local router will be used.
[community] (optional) is the name of the SNMP community
that grants access to that node. If you omit the name, “public” is
used. If you include a name, the IP address must also be included.
Example
rgetis 15.2.1.94
Displays the IPX servers that the router whose IP address is
15.2.1.94, discovered by listening to the SAP protocol:
Net Address Sock Idx Name Age Hop Type IF
00010000.02608c1bbfc3 0451 01 Larry 130 1 24 2
The fields in the table are as follows:
Net Address lists the server IPX network and station ad-
dress in hexadecimal format.
Sock lists the IPX socket for the server in hexadecimal
format.
Idx lists the small index integer that distinguishes multiple
servers with the same Net Address and Sock.
Name lists the IPX servers name (abbreviated to the first 15
characters and
*
)
Age lists how many seconds since a SAP advertisement of
this server was received.
Hop lists the number of hops to the destination specified in
Net Address.
NCL
Commands
16
Using the Network Control Language
Accessing Bridging and Routing Tables
16-65