HP (Hewlett-Packard) 200 Network Router User Manual


 
Action: No user action required. The router will try to re-syncronize the
connection. If this happens frequently, check the terminal adapter’s
configuration.
DCE set DSR while waiting for IND
Meaning: While the router was waiting for an indication from the terminal adapter,
the adapter unexpectedly pulled up DSR. This indicates that the router
and adapter are out of synchronization during a V.25 bis exchange. The
router will drop DTR and re-attempt the connection if the retry count
permits.
Action: No user action required. The router will try to re-syncronize the
connection. If this happens frequently, check the terminal adapter’s
configuration.
DEV CCT:
cct
: Ethernet circuit record missing
Meaning: Circuit is undefined.
Action: Modify the configuration to include a circuit record for cct #.
DEV CCT: cct - Ethernet line record missing
Meaning: The driver cannot associate circuit cct with an existing line record.
Action: Modify the configuration to include proper line and circuit records.
DEV CCT:
cct
- Invalid QOS for PPP, QOS = LLC1
Meaning: The Quality of Service parameter for circuit cct was not configured as
LLC1 (unreliable datagram). Since LLC1 is the only appropriate Quality
of Service for the driver to use for Point-to-Point protocol, the Quality of
Service parameter has been automatically modified to be LLC1. Note
that the PPP subsystem, not the driver, provides additional services
beyond LLC1.
Action: Modify the configuration so that the Quality of Service parameter is
LLC1.
Event Log
Messages
17
Event Log Messages
cct: Circuit Event Messages
17-27