HP (Hewlett-Packard) 200 Network Router User Manual


 
FGET Waiting for route to destination
IP_address
Meaning: The destination IP address was unavailable. The system is retrying the
request.
GET
remote-filename
from
ip-address
, file
local-filename
GET CONFIG from
ip-address
, file CONFIG
Meaning: Echoes the Fget command request.
Insufficient resources for Enable
Meaning: Couldn’t allocate a message buffer to register TFTP’s port with UDP.
ip_ctrl_id not valid for FGET OS request
Meaning: The IP entity is not in a state to accept requests from upper layers, so
the Fget command could not be executed.
Action: Check that IP is configured correctly and is enabled.
IP not in valid state to accept FGET OS request
Meaning: The IP entity may not be enabled. We cannot invoke TFTP without IP
being in the running state.
Action: Ensure that IP is enabled.
Not enough free memory for OS after reclamation!
Meaning: The operating system image is too large for the current configuration.
Action: Reconfigure the entire router for IP only, and reconfigure only the TFTP
port.
Not enough memory for OS - - will retry
Meaning: The operating system image is too large for the current configuration.
TFTP is rebooting to reclaim memory and try again.
Event Log
Messages
17
Event Log Messages
tftp: TFTP and Fget Event Messages
17-129