Filter
Top Products
For additional information, refer to “Host Number (high)” earlier in this chapter. To
learn how to assign a Host list to a filter, refer to “Dest Host (low)” and “Source
Host (low).”
Internal Network
Number
Required if IPXWAN is set to "Yes". Must be unique within the relevant routing
area, and is distinct from the network numbers of the physical network segments
in a routing area. The internal network number is an 8-digit hexadecimal value
(padded with zeroes if necessary).
Internal Router Name
Required if IPXWAN is set to "Yes". Provides an easily-identifiable name, especially
for network management purposes to identify systems by user-defined mnemonic
names. Can be from 1 to 47 uppercase English characters, plus the underscore (_),
hyphen (-) and @ sign. Blank spaces are not allowed.
Note: Blank spaces are not supported.
IPXWAN
Enables or disables IPX operation over a WAN link. If enabled, requires values for
the Internal Network Number and the Internal Router Name parameters (accessed
through the "4. Internal Network Number and Router Name" IPX menu item).
Currently supported over the following WAN protocols: PPP, Frame Relay, X.25,
Point-to-Point, and HP Point-to-Point.
Default: No
No
Disables IPX operation over a WAN link.
Yes
Enables IPX operation over a WAN link.
List Name
Accepts the name of a Host list, Network list, Packet Type list, or Socket list.
Network lists
Displays a screen with parameters for defining a Network list. For information
about creating a Network list, refer to “Network Number (low)” and “Network
Number (high)” later in this chapter. For information about assigning the Network
list to a filter, refer to “Dest Network (low)” and “Source Network (low).”
Network Number
Accepts the IPX network number for the IPX network connected to the router
interface. All IPX networks are identified by a locally-assigned network number.
IPX network numbers consist of an 8-digit hexadecimal value (pad with leading
zeros if necessary.
Note: HP routers support one IPX network number per interface.
Network
Number (high)
Sets the upper boundary of the range for filtering IPX source or destination
networks when creating a Network list.
IPX Protocol
Parameters
11
IPX Protocol Parameters
Parameters and Options
11-11