HP (Hewlett-Packard) 200 Network Router User Manual


 
Action: Check for a loose or disconnected cable, and verify other hardware.
Token SRA Programming Failure
Meaning: The token ring device failed SRA programming, indicating a possible
hardware failure. Source route bridging will not function properly.
Action: Contact your Hewlett-Packard support provider.
too many bytes lost: link unreliable
Meaning: For the indicated PPP circuit, the number of bytes lost (either by the
system or by the remote station) exceeded the allowed number of lost
bytes as determined using the Desired Link Quality parameter. All
Network Control Protocols will be brought down by the system. The
system will continue to send and receive Link Quality Report (LQR)
packets. When desired link quality is re-established, the Network
Control Protocols will be brought up again.
Too many channels to aggregate (max set to
X
)
Meaning: The router configuration has too many channels to aggregate. The router
will set the channel number to X.
Action: Correct the router configuration.
Too many circuits configured for slot
XX
Meaning: The configuration contains more than four frame relay interfaces for a
single slot. The slot number of the error is included as XX.
Action: Modify the configuration so that there are fewer frame relay interfaces
for slot XX.
too many packets lost: link unreliable
Meaning: For the indicated PPP circuit, the number of packets lost (either by the
system or by the remote station) exceeded the allowed number of lost
packets as determined using the Desired Link Quality parameter. All
Network Control Protocols will be brought down by the system. The
system will continue to send and receive Link Quality Report (LQR)
Event Log
Messages
17
Event Log Messages
cct: Circuit Event Messages
17-53