Filter
Top Products
packets. When desired link quality is re-established, the Network
Control Protocols will be brought up again.
Too many V.25 bis maps defined, limit = %d
Meaning: Too many V.25 bis map records have been defined. The maximum
number allowed is 255.
Action: Check your configuration file and reduce the number of configured
items.
Too many V.35 circuits configured
Meaning: The configuration contains an excessive number of V.35 line records for
this slot.
Action: Modify the configuration.
Transceiver signal loss
Meaning: The LAN controller cannot communicate with the Ethernet/802.3
transceiver.
Action: Verify the integrity of the transceiver.
transmit congestion on cct
X
Meaning: Indicates that the flow of data to be transmitted to the given V.25 bis
circuit (cct) has exceeded the circuit’s capacity, and packets have been
dropped.
Action: Slow down the information rate or increase the available line bandwidth.
Transmit underflow detected
Meaning: The link level controller has truncated packet transmission because of
an interruption in the flow of data from memory.
Event Log Messages
cct: Circuit Event Messages
17-54