Rgetata: Displaying the AARP Table
Use NCL’s Rgetata command to format and display the AppleTalk
Address Resolution Protocol (AARP) table for a local or remote HP
router.
Syntax
rgetata [X.X.X.X] [community]
[X.X.X.X] (optional) is the IP address of the local or remote
router in dotted decimal notation. If you omit this field, an IP
address on the local router will be used.
[community] (optional) is the name of the SNMP community
that grants access to that node. If you omit the name, public is
used. If you include a name, the IP address must also be included.
Example
rgetata 15.2.1.94
Displays the AARP table for the node whose IP address is
15.2.1.94:
Net.Node Phys Address IF
102.3 080009000411 3
160.147 0800098333ab 12
The fields in the table are as follows:
Net.Node lists the AppleTalk node address (network number and
node identifier).
Phys Address lists the station (or physical or MAC ) address of
Net.Node.
IF lists the sequential number the router assigned to the network
interface for Net.Node.
Using the Network Control Language
Accessing Bridging and Routing Tables
16-57
