Filter
Top Products
Source Route
(Token Ring)
Enables or disables source routing over token ring media for the interface you are
defining. Because the HP Router PR does not have a token ring port, this option
should always be set to No.
Default: No
No
Disables token ring source routing.
Source Socket (high)
Sets the upper boundary of the range for filtering an IPX packet based on the
contents of its source socket field.
Options
Leave this field blank if you do not want to filter IPX source sockets.
Leave this field blank and enter the IPX socket number in the Source Socket
(low) field if you are filtering a single IPX source socket.
Enter the highest IPX socket number in the range if you are filtering a range of
IPX source sockets.
Leave this field blank and enter the name of the Socket list in the Source Socket
(low) field if you want to use a Socket list to establish the upper and lower range
of IPX source socket numbers.
For additional information, refer to “Source Socket (low)” later in this chapter. For
more information about Socket lists, refer to “Socket (high)” and “Socket (low)”
earlier in this chapter.
Source Socket (low)
Sets the lower boundary of the range for filtering an IPX packet based on the
contents of its source socket field.
Options
Leave this field blank if you do not want to filter IPX source sockets.
Enter the IPX socket number in this field and leave the Source Socket (high)
field blank if you are filtering a single IPX source socket.
Enter the lowest IPX socket number in this field and enter the highest socket
number in the Source Socket (high) field if you are filtering a range of IPX
source sockets.
Enter the Socket list name in this field and leave the Source Socket (high) field
blank if you want to use a Socket list to establish the upper and lower range of
source socket numbers.
For additional information, refer to “Source Socket (high)” earlier in this chapter.
For more information about Socket lists, refer to “Socket (high)” and “Socket
(low)” earlier in this chapter.
IPX Protocol Parameters
Parameters and Options
11-18