HP (Hewlett-Packard) 200 Network Router User Manual


 
IP Next Hop
Designates the router through which to access the target network. This is the next
hop router address configured under IP static routes. Enter the IP address of the
next hop router in dotted decimal notation.
Remote Station Number
Is the phone number to the next-hop router. You can assign up to 15
numbers to the same router. If the first number fails, the remaining numbers
will be retried in sequence until a connection is made. The last successful
number used will be the first tried when the next call is attempted.
Each number will be tried as many times as specified in the Connect retry
count parameter. Thus, with three phone numbers entered and a Connect
retry count set to 3, the router will try up to nine times to establish a
connection.
Subaddress
Is any additional phone number, such as an internal extension, required to
reach the next-hop router identified by the Remote station number
parameter.
VC inactivity time
(sec)
Sets the minimum time to leave the v.25 bis circuit up if other virtual circuits
are queued waiting for a v.25 bis port to become available. If no other virtual
circuits are waiting, then the v.25 bis Minimum connect duration and
Connect inactivity time parameters are used.
Options
Default: 10
Range: 1 through 60
V.25 bis Network Mapping
Parameters and Options
14-4