HP (Hewlett-Packard) 200 Network Router User Manual


 
Token Ring Circuits
adpt_bad_dio_par contains the number of times the token-ring
adapter detected a bad parity value on data passed to the adapter
through a direct I/O access.
adpt_dma_rd_abort contains the number of times the token-ring
adapter aborted a direct-memory-access read operation. This could be
caused by excessive parity errors, excessive bus errors, or the expira-
tion of a 10-second timer while waiting for a directory-memory-access
bus operation to complete.
adpt_dma_wr_abort contains the number of times the token-ring
adapter aborted a direct-memory-access write operation. This could be
caused by excessive parity errors, excessive bus errors, or the expira-
tion of a 10-second timer while waiting for a directory-memory-access
bus operation to complete.
adpt_parity_err contains the number of times the token-ring
adapter detected a bus parity error on the adapter’s internal bus.
adpt_ring_underrun contains the number of times the token-ring
adapter detected an internal direct-memory-access underrun when
receiving from the ring.
frames_rx_per_sec contains the number of frames that this circuit
has received in the last second.
frames_tx_per_sec contains the number of frames that this circuit
has received and transmitted in the last second.
log_ari_fci_err contains the number of times the token-ring adapter
detected that is upstream neighbor was unable to set the address-recog-
nized indicator or frame-copied indicator bit of received frames.
log_burst_err contains the number of times the token-ring adapter
detected the absence of signal transitions for five half-bit times between
the starting and ending delimiters, or between the ending and starting
delimiters.
Managment
Information Base
18
Management Information Base Variables
cct: Circuits Information Base
18-37