HP (Hewlett-Packard) 200 Network Router User Manual


 
For more information, refer to “MAC dest (low).” To learn how to create a MAC
Address list, refer to “MAC Address (low)” and “MAC Address (high).”
MAC dest (low)
Sets the lower boundary of the range for filtering a frame based on the contents
of its MAC-level destination address field.
Options
Leave this field blank if you do not want to filter a frame based on its MAC
destination address.
Enter the destination address in this field and leave the MAC dest (high) field
blank if you are filtering a single MAC destination address.
Enter the lowest MAC destination address in this field and enter the highest
MAC destination address in the MAC dest (high) field if you are filtering a
range of MAC destination addresses.
Enter the name of a MAC Address list in this field if you are establishing the
range of MAC destination addresses with a filter list.
For more information, refer to “MAC dest (high).” To learn how to create a MAC
Address list, refer to “MAC Address (low)” and “MAC Address (high).”
MAC source (high)
Sets the upper boundary of the range for filtering a frame based on the contents
of its MAC-level source address field.
Options
Leave this field blank if you do not want to filter a frame based on its MAC
source address.
Leave this field blank and enter the source address in the MAC source (low)
field if you are filtering a single MAC source address.
Enter the highest MAC source address in the range if you are filtering a range
of MAC source addresses.
Leave this field blank and enter the name of the MAC Address list in the MAC
source (low) field if you are establishing a range of MAC source addresses
with a MAC Address list.
For more information, refer to “MAC source (low)”. To learn how to create a
MAC Address list, refer to “MAC Address (low)” and “MAC Address (high).”
MAC source (low)
Sets the lower boundary of the range for filtering a frame based on the contents
of its MAC-level source address field.
Options
Leave this field blank if you do not want to filter a frame based on its MAC
source address.
Bridge
Parameters
6
Bridge Parameters
Parameters and Options
6-15