Filter
Top Products
Yes
Enables random load balancing and disables Host ID load balancing—the router
evenly distributes IPX network traffic among all circuits within a circuit group to
carry all network traffic (packets) between the source and destination.
Note: In some cases, random load balancing can interfere with Novell burst mode
NLM.
RIP Interface Cost
Sets the cost for each router hop. Standard IPX RIP implementations assign a cost
of 1 to each hop.
Default: 1
RIP Listen
Enables or disables the RIP listen function. RIP Listen specifies whether the IPX
router adds routes received in RIP updates from neighboring routers to its own
internal routing table.
Default: Yes
Yes
Enables the RIP listen function.
No
Disables the RIP listen function.
RIP Supply
Enables or disables the RIP supply function. RIP Supply determines whether the
IPX router transmits periodic RIP updates.
Default: Yes
Yes
Enables the RIP supply function.
No
Disables the RIP supply function.
RIP Table Cost
Sets the cost for the relay to the next-hop.
RIP and SAP
split horizon
Determines whether the router can exclude or include RIP and SAP updates sent
to a neighbor that were already learned by the neighbor.
Default: Yes
No
Include RIP and SAP updates already learned by a neighbor.
Yes
Exclude RIP and SAP updates already learned by a neighbor.
IPX Protocol Parameters
Parameters and Options
11-14