Filter
Top Products
Accessing a Remote Management
Information Base
Two NCL commands work with the Simple Network Management
Protocol (SNMP) agent and the IP routing application to provide access
to the Wellfleet enterprise-specific section of the MIB of a remote HP
or Wellfleet router. Hewlett-Packard Company and Wellfleet
Communications, Inc., share this definition for their routers. The
structure and the variables in this MIB are described in chapter 18. NCL’s
highest-level branches, listed in the “Managed Objects Table” on page
16-32, are branches in this section of the MIB. These commands default
a portion of the complete pathname,
“iso.org.dod.internet.private.enterprises.wellfleet.commServer.wfmib”
or “1.3.6.1.4.1.18.1.1”.
The commands available in this category are the following.
Command Function
Rgetmw Display the value of a branch of MIB variables from a remote HP router.
(page 16-49).
Rgetw Display the value of an individual MIB variable from a remote HP router. (page 16-50).
These commands are described below. They display their output on the
console screen. To output the display to a printer or file instead of the
console screen, place the command syntax, as shown below for each
command, within the Print command (described on page 16-19).
Using the Network Control Language
Accessing a Remote Management Information Base
16-48