HP (Hewlett-Packard) 200 Network Router User Manual


 
octets_tx_per_sec contains the number of octets that this circuit has
transmitted in the last second.
octets_rx_ok contains the number of octets (bytes) received without
error by circuit cct.
octets_tx_ok contains the number of octets (bytes) transmitted
without error by circuit cct.
oflo_rx contains the total number of overflows on circuit cct. An
overflow occurs when the local area controller (SONIC) could not keep
pace with flow of incoming data and lost part or all of an incoming
frame.
peak_frames_rx contains the peak number of frames that this circuit
has received in any given second since reboot.
peak_frames_tx contains the peak number of frames that this circuit
has transmitted in any given second since reboot.
peak_octets_rx contains the peak number of octets that this circuit
has received in any given second since reboot.
peak_octets_tx contains the peak number of octets that this circuit
has transmitted in any given second since reboot.
to_long_error_rx contains the number of frames received by circuit
cct that exceeded 1518 bytes in length (this count does not include the
64-bit frame preamble and synchronization bits).
total_rx_error contains the total number of receive errors on
circuit cct. This value equals the sum of alig_error_rx,
fcs_error_rx, frams_incomp_rx, lack_resc_error_rx,
oflo_rx, and to_long_error_rx.
total_tx_error contains the total number of transmit errors on cir-
cuit cct. This value equals the sum of babl_error_tx, bufferr_tx,
excessv_colln_tx, late_colln_tx, deferred_tx, lcar_tx,
and uflo_tx.
tx_congestion contains the number of times a buffer wasn’t available
to transmit a frame.
Managment
Information Base
18
Management Information Base Variables
cct: Circuits Information Base
18-33