Filter
Top Products
LCP is down
Meaning: For the indicated PPP circuit, Link Control Protocol (LCP) has gone
down. If the LCP Auto-Restart option was configured as Yes, then the
system attempts to restart LCP.
LCP is up
Meaning: For the indicated PPP circuit, Link Control Protocol (LCP) is up. The
system now attempts to bring up the appropriate network layer control
protocols.
Local disconnected remote
Meaning: The router has disconnected the point-to-point link after first sending a
disconnect request to the remote end and receiving an unnumbered
acknowledgment.
Local LLC reset remote
Meaning: The router has sent a reset request to the remote end of the
point-to-point link.
Local not hearing from remote
Meaning: A disparity exists between the ends of a point-to-point circuit. The
circuit’s remote signal and sense testing require that both ends of the
circuit be designated as “active”. This message is generated by the active
side of a mismatched pair.
Action: Modify the configuration to ensure that the Remote signal & sense
parameter is set to Active on both of the routers.
Local reset of remote succeeded
Meaning: The router has received a reset indication in response to an outstanding
reset request.
Event Log
Messages
17
Event Log Messages
cct: Circuit Event Messages
17-35