HP (Hewlett-Packard) 200 Network Router User Manual


 
Options
If you are filtering a single MAC or data-link header, enter the MAC or data-
link header in this field and leave the High Value (hex) field blank.
If you are filtering a range of MAC or data-link headers, enter the lowest MAC
or data-link header in this field and enter highest MAC or data-link header in
the High Value (hex) field.
For additional information, refer to “High Value (hex)”.
MAC Address (high)
Sets the upper boundary of the MAC address range when creating a MAC
Address list.
Options
If you are filtering a single MAC address, leave this field blank and enter the
address in the MAC Address (low) field.
If you are filtering a range of MAC addresses, enter the highest MAC address in
the range.
For more information, refer to “MAC Address (low).” To learn how to apply a
MAC Address list to a filter, refer to “MAC dest (low)” and “MAC source (low).”
MAC Address (low)
Sets the lower boundary of the MAC address range when creating a MAC
Address list.
Options
If you are filtering a single MAC address, enter the MAC address in this field
and leave the MAC Address (high) field blank.
If you are filtering a range of MAC addresses, enter the lowest MAC address in
this field and enter the highest MAC address in the MAC Address (high) field.
For more information, refer to “MAC Address (low).” To learn how to apply a
MAC Address list to a filter, refer to “MAC dest (low)” and “MAC source (low).”
MAC dest (high)
Sets the upper boundary of the range for filtering a frame based on the contents
of its MAC-level destination address field.
Options
Leave this field blank if you do not want to filter MAC destination addresses.
Leave this field blank and enter the destination address in the MAC dest (low)
field if you are filtering a single MAC destination address.
Enter the highest MAC destination address in the range if you are filtering a
range of MAC destination addresses.
Leave this field blank and enter the name of the MAC Address list in the MAC
dest (low) field if you are establishing a range of MAC destination addresses
with a MAC Address list.
Bridge Parameters
Parameters and Options
6-14