Filter
Top Products
in_tx_lqrs Is an eight-bit state variable indicating the number of Link
Quality Report (LQR) packets that the remote peer remote station had
to transmit so that the local end could receive exactly one LQR. The
in_tx_lqrs variable defines the length of the period over which
in_tx_packets, in_tx_bytes, in_rx_packets, and
in_rx_bytes were measured.
in_tx_pkts Is a 32-bit state variable indicating the number of packets
that were transmitted on the inbound link during the last period. In
other words, in_tx_pkts indicates the number of packets the remote
peer station transmitted during the last period.
last_out_tx_bytes Is a 32-bit state variable storing the value of the
Out-Tx-Octets-Ctr from the last received Link Quality Report
packet. In other words, last_out_tx_bytes indicates the total
number of bytes transmitted by the remote peer station since the LCP
reached the open state.
last_out_tx_pkts Is a 32-bit state variable storing the value of the
Out-Tx-Packets-Ctr from the last received Link Quality Report
packet. In other words, last_out_pkts indicates the total number of
packets transmitted by the remote peer station since the LCP reached
the open state.
last_in_rx_bytes Is a 32-bit state variable storing the value of the
In-Rx-Bytes-Ctr from the last received Link Quality Report packet.
In other words, last_in_rx_bytes indicates the total number of
bytes received by the peer (remote) station since the LCP reached the
open state.
last_in_rx_bytes
last_in_rx_pkts Is a 32-bit state variable storing the value of the
In-Rx-Packets-Ctr from the last received Link Quality Report
packet. In other words, last_in_rx_pkts indicates the total number
of packets received by the peer (remote) station since the LCP reached
the open state.
pppLinkQualityEntry {pppLinkQualityTable1} Provides Link
Quality Management information about a particular PPP link.
Management Information Base Variables
cct: Circuits Information Base
18-36