HP (Hewlett-Packard) 200 Network Router User Manual


 
isdn: ISDN (V.25 bis) Information
Base
The “isdn” information base contains variables for V.25 bis lines through
a terminal adapter (manual or automatic dialing). The structure is the
following:
isdn V.25 bis
adapter the terminal adapter branch (see subheading)
ccttbl V.25 bis circuit table
variables the terminal adapter variables, listed below
cct # the circuit number as an index
mapping the IP-mapping branch
ipmapping
variables the IP-mapping variables, listed below
instance map entry or other variable
The pathnames are constructed as follows:
isdn.adapter.ccttbl.variable.cct#
or 49.1.1.variable#[cct#]
isdn.mapping.ipmapping.variable[instance]
or 49.2.1.variable#[instance]
The variables are listed alphabetically under two branches:
V.25 bis Adapter
bandwidth[cct#] contains the maximum bandwidth allowed for an
outbound connection. This value is only used when the V.25 bis exten-
sions are set for per channel bandwidth and maximum channels to
aggregate. (Value = per channel Bandwidth * Max channels to aggregate.)
cctname[cct#] contains the name configured for this circuit, such
as WAN1.
Management Information Base Variables
isdn: ISDN (V.25 bis) Information Base
18-70