Filter
Top Products
Summary: Displaying the Quick Configuration
Summary
Use NCL’s Summary command to display the summary table that Quick
Configuration presents at the top of the screen. You remain in NCL; you
do not actually go into Quick Configuration as selected from the Main
menu. (To output the display to a printer or file instead of your console
screen, see the Print command on page 16-19.)
Syntax
summary
For control of the Summary screen:
• Use the [<], [>], [^], and [v] to move in the Summary screen.
• Use the Space bar or [Return] to sequence through the screen and
return to the NCL prompt.
• Use the [Ctrl] [C] key combination to exit from any part of the
Summary screen and return to the NCL prompt.
Hotswapping in the HP Router 650 If there is a conflict between a
slot configuration in the configuration file and the hardware installed in
that slot when Summary is invoked (such as when you have hotswapped
an interface module but have not yet reconfigured the router), you will
see a screen similar to the one shown on the next page.
NCL
Commands
16
Using the Network Control Language
Managing Router Operations and Resources
16-25