HP (Hewlett-Packard) 200 Network Router User Manual


 
subaddr[cct#] contains the last subaddress sent on an outbound
connection or received on an inbound connection. If not known, the
value is set to Unknown. If no connection has been established since the
router was booted, the value is set to Never used.
IP Mapping
ip_networks[IP-addr-for-hop] contains the IP network map to
the circuit. Each IP address accessible for this hop is a separate index
(the instance within the square brackets).
ipmapcctname[map#] contains the actual circuit name associated
with the map. This indication is valid only when the map state is
Connecting or Connect. In other states the variable contains “No
circuit mapped”.
ipmapconndrop[map#] contains the number of packets dropped
for this map while the map was connecting and during the connected
state.
ipmapconnectnum[map#] contains the number of separate
successful calls made on behalf of this map.
ipmapconnecttime[map#] contains the amount of time this map
has been in the connected state (that is, total connect time for the map).
ipmapdowndrop[map#] contains the number of packets dropped
for this map while the map was going down. This occurs when packets
are queued to be sent and either the user disables the map or the
connection is lost during data transfer.
ipmaprcvpkt[map#] contains the number of packets successfully
received for this map.
Management Information Base Variables
isdn: ISDN (V.25 bis) Information Base
18-72