HP (Hewlett-Packard) 200 Network Router User Manual


 
xrx:
ccg
: Rcvd Err Pkt –
err#
, Param =
errparam
Meaning: An error packet has been received by the XNS router. ccg is the circuit
group on which the error packet was received. err# is the error number
(in decimal) of the error packet. errparam is the error parameter (in
decimal) of the error packet.
Valid error numbers are:
0
1
2
3
512
513
514
515
516
Unspecified error at destination.
Bad checksum or other packet inconsistency at destination.
Unknown socket at destination.
Destination resource limitations.
Unspecified error before reaching destination.
Bad checksum or inconsistency before reaching destination.
Destination host cannot be reached.
Packet exceeded hop count of 15.
Packet too large to forward; the errparam is the maximum
acceptable length.
xrx: CG
ccg
: Del Rt to
dest_net
via
next_hop_net
:
next_hop_gw
where:
ccg is the name of the circuit group on which the route was
learned.
dest_net is the destination network to which the router referred.
next_hop_net is the directly connected network that was to be used to get
to the next hop router.
next_hop_gw is the XNS or IPX address of the router that was the next
hop for traffic destined for dest_net.
Event Log Messages
xrx: XNS Router Event Messages
17-148