Filter
Top Products
entity enabled
Meaning: DECnet successfully initialized, or has been enabled with the NCL’s
Enable command.
Init Fail CG
ccg
, Block size small, Ver=
nn.nn.nn
Meaning: An adjacent host (accessible over circuit group ccg) failed to complete
initialization because of an insufficient configured block size.
No DECnet Record configured
Meaning: The configuration does not contain a DECnet record.
Action: Modify the configuration to include a
DECnet configuration record.
Node Reach Chg Node
aa.nnnn
, Reachable
Meaning: The previously unreachable node, whose area and node address are
aa.nnnn, has become reachable.
Node Reach Chg Node
aa.nnnn
, Unreachable
Meaning: The previously reachable node, whose area and node address are
aa.nnnn, has become unreachable.
Pkt Fmt Err CG
ccg
,
ffffffffffff
, node=
aa.nnnn
Meaning: The DECnet router received a partially correct packet from node
aa.nnnn over circuit group ccg. ffffffffffff is the hexadecimal
representation of the first six bytes of the packet.
remote SMDS address invalid for DRS Area
XX
, Node
YY
Meaning: The SMDS address in the entry in the DECnet Routing Service (DRS)
Remote Address Map for DECnet Area XX, system YY, is invalid. An
SMDS address is 10 digits in length, and each digit must be in the range 0
to 9.
Action: Modify the configuration to correct the SMDS address in the appropriate
DECnet Address Map entry.
Event Log
Messages
17
Event Log Messages
drs: DECnet Event Messages
17-77