Filter
Top Products
remote station rejected IPCP
Meaning: For the indicated PPP circuit, the remote station has rejected the IP
Control Protocol (IPCP). No IP traffic may occur over the link until the
remote station is ready to accept the IP Control Protocol.
remote station rejected IPXCP
Meaning: For the indicated PPP circuit, the remote station has rejected the IPX
Control Protocol (IPXCP). No IPX traffic may occur over the link until
the remote station is ready to accept the IPX Control Protocol.
remote station rejected LCP
Meaning: For the indicated PPP circuit, the remote station has rejected the Link
Control Protocol (LCP). Link initialization cannot continue until the
remote station is ready to accept the Link Control Protocol.
remote station rejected UPAP
Meaning: For the indicated PPP circuit, the remote station has rejected the
User/Password Authentication Protocol (UPAP). Link initialization
cannot continue until the remote station is ready to accept the
User/Password Authentication Protocol.
Action: If UPAP is not considered necessary, then modify the configuration to
disable UPAP.
remote station’s login attempt failed
Meaning: For the indicated PPP circuit, the remote station failed in its attempt to
login to the system. The remote station’s User ID or Password (or both)
were incorrect.
Action: The remote station’s User ID and/or Password in the configuration may
be modified (if desired) so that the remote station may successfully
login to the system.
Event Log
Messages
17
Event Log Messages
cct: Circuit Event Messages
17-47