HP (Hewlett-Packard) 200 Network Router User Manual


 
No
Disables heartbeat polling.
Yes
Enables heartbeat polling.
Use SNAP
Identifies the version of IEEE 802.6 to be used.
Default: Yes
Yes
Enables the approved version of IEEE 802.6 (D15). With 802.6 (D15),
encapsulation as specified by Internet RFC 1209, IP Over SMDS.
No
Enables IEEE version(s) D9 and D11. With IEE 802.6 (D9/D11), an At&T
proprietary encapsulation is used.
Use UPAP
Enables the User Password Authentication protocol (UPAP). Point-to-Point
implementations can require a remote peer to authenticate itself before
engaging in NCP negotiation. For more information, refer to the RFC 1172
specification.
Default: No
No
Disables UPAP.
Yes
Enables UPAP.
User ID of Remote
Station
Accepts the name (user ID) used by the remote Point-to-Point peer when
logging into the local router. Enter the name as an ASCII string of less than
16 characters
Window Size
Used with HP Point To Point circuits to specify an exact number of packets
that may be unacknowledged at any one time. Modulus specifies a
maximum number of unacknowledged packets. This toggle option offers
different choices for different current settings of Modulus. The options are:
Modulus Setting Windows Size Options
8 7, 1, or 3
128 1,3,7,15, 31, 63, 127
Circuit Parameters
Parameters and Options
4-28