Filter
Top Products
time Is the value of sysUpTime at which the error was detected.
exmib.fr.errtbl.entry.time.cct #
36.26.3.1.4.cct #
where cct # indicates the circuit.
type Is the type of error that was last seen on this interface. The fol-
lowing values are valid for this field:
• unknownErr (1)
• receiveShort (2)
• receiveLong (3)
• illegalDLCI (4)
• unknownDLCI (5)
• ImiProtoErr (6)
• ImiUnknownIE (7)
• ImiSequenceErr (8)
• ImiUnknownRpt (9)
exmib.fr.errtbl.entry.type.cct #
36.26.3.1.2.cct #
where cct # indicates the circuit.
Ethernet/802.3
alig_error_rx contains the number of non-aligned frames received
by circuit cct. A non-aligned frame does not end on a byte boundary.
babl_error_tx contains the number of babbles on circuit cct. A
babble occurs when the transmitter portion of the local area controller
(SONIC) transmits an Ethernet or IEEE 802.3 frame containing more
than 1518 bytes (this byte count does not include the 64-bit frame
preamble and synchronization bits). In such an instance, the transmitter
completes sending the entire frame, and increments this counter.
buferr_tx contains the number of transmit buffer errors. A transmit
buffer error indicates corruption of the transmit descriptor ring
associated with circuit cct. Usually such corruption takes the form of a
break in the data chain (a series of pointers to multiple buffers that
contain consecutive portions of a lengthy frame). A transmit buffer error
disables the transmitter portion of the local area controller (SONIC).
Management Information Base Variables
cct: Circuits Information Base
18-30