HP (Hewlett-Packard) 200 Network Router User Manual


 
atmib: AppleTalk MIB Information
Base
The “atmib” information base contains variables that describe
transmission and reception activities of the AppleTalk router. The
structure is the following:
atmib
protocol stands for the specific AppleTalk protocol (see
subheadings)
variables listed below
The pathname is constructed as follows:
atmib.protocol.variable
The variables are listed alphabetically under each protocol:
AppleTalk Echo Protocol (AEP)
aep_Reply_tx contains the total number of AEP REPLY packets
transmitted by the AppleTalk router.
aep_Req_rx contains the total number of
AEP REQUEST packets
received by the AppleTalk router.
Datagram Delivery Protocol (DDP)
ddp_bad_cksum contains the total number of AppleTalk packets
dropped by the AppleTalk router because the packet contained an
incorrect
DDP checksum value.
ddp_fwd contains the total number of AppleTalk packets forwarded
by the AppleTalk router.
ddp_hop_ct_exceed contains the total number of AppleTalk packets
dropped by the AppleTalk router because the packet’s hop count was
too large.
Managment
Information Base
18
Management Information Base Variables
atmib: AppleTalk MIB Information Base
18-9