HP (Hewlett-Packard) 200 Network Router User Manual


 
ip: IP Information Base
The IP router “ip” information base contains variables that describe
transmission and reception activities across each IP interface; it also
contains variables describing the IP routing table. The structure is the
following:
ip
ip_interface the interface-specific branch (see subheading)
ip-address the IP address in dotted decimal
notation
variables the interface-specific variables
ip_route_table the routing table branch (see subheading)
net_tree
variables the routing table variables
The pathnames are constructed as follows:
ip.ip_interface.ip-address.variable
ip.ip_route_table.net_tree.variable
The variables are listed alphabetically under the two branches:
Interface Specific
address contains the 32-bit IP address of interface ip-address
expressed as a decimal integer.
drop.dest_unknown contains the number of IP datagrams dropped
by interface ip-address because the IP header contained an unknown
or corrupt IP destination address.
drop.filtered contains the number of IP datagrams dropped by
interface ip-interface in response to source-address or destination-
address filters established at router configuration.
Management Information Base Variables
ip: IP Information Base
18-64