Filter
Top Products
timep: Time Protocol Event
Messages
These messages are generated by the system variable "timep".
can’t reach time server
ip-address
Meaning: The client cannot reach the server with the ip-address. The normal
cause is that the subnet of the server is not yet known by IP. However, if
the condition persists for several minutes, it indicates that some part of
the path is down or that the configured address is incorrect.
Action: Check that the correct address for the Timep server is configured.
Check that the server’s subnet is entered in the IP routing table by using
NCL’s Rgetr command.
changing time
Meaning: The time fields in front of this event message indicate what the time was
before it was changed by a request from the Timep server, and to what
the time was changed. (See the description of the message entry at the
beginning of this chapter.)
entity already disabled
Meaning: An already disabled Time Protocol has received NCL’s Disable command.
entity already enabled
Meaning: An already enabled Time Protocol has received NCL’s Enable command.
entity disabled
Meaning: Time Protocol has been disabled in response to NCL’s Disable command.
Event Log
Messages
17
Event Log Messages
timep: Time Protocol Event Messages
17-133