Filter
Top Products
cct: Circuit Event Messages
These event message are generated by the system variable "cct", for
circuits.
ATCP is down
Meaning: For the indicated PPP circuit, Appletalk Control Protocol (ATCP) has
gone down.
ATCP is up
Meaning: For the indicated PPP circuit, Appletalk Control Protocol (ATCP) is up.
Adapter accepted CIC command
Meaning: The adapter accepted the router CIC command.
Adapter accepted CRN command
Meaning: The terminal adapter accepted the router CRN command.
Adapter accepted DIC command
Meaning: The adapter accepted the router DIC command.
Adapter did not accept CIC command
Meaning: The terminal adapter has rejected the router CIC command. The router
will bring down the circuit and not allow any more connections on this
circuit.
Action: This error indicates either a configuration error on the router or on the
terminal adapter, or an incompatablity between them. You must change
the configuration. If an adapter error is sent, the router will log it.
(Check for this error if available.)
Event Log Messages
cct: Circuit Event Messages
17-18