HP (Hewlett-Packard) 200 Network Router User Manual


 
Circuit Frame Level
bad_len_rx contains the number of supervisory FRMR (Frame
Reject) frames received by X.25 circuit cct that contained W and X bits
set to 1. This bit pattern indicates that the remote end has rejected a
supervisory or unnumbered frame issued by X.25 circuit cct because the
frame length was faulty.
bad_len_tx contains the number of supervisory
FRMR (Frame
Reject) frames transmitted by X.25 circuit cct that contained W and X
bits set to 1. This bit pattern indicates that X.25 circuit cct has rejected
a previously received supervisory or unnumbered frame because the
frame length was faulty.
bad_nr_rx contains the number of supervisory
FRMR (Frame
Reject) frames received by X.25 circuit cct that contained a Z bit equal
to 1. This bit pattern indicates that the remote end has rejected a frame
issued by X.25 circuit cct because it contained a faulty receive sequence
number.
bad_nr_tx contains the number of supervisory
FRMR (Frame
Reject) frames transmitted by X.25 circuit cct that contained a Z bit
value equal to 1. This bit pattern indicates that X.25 circuit cct has
rejected a previously received frame because the frame contained a
faulty receive sequence number.
disc_rx contains the count of unnumbered
DISC (Disconnect)
frames received by X.25 circuit cct. DISC frames terminate the
DCE/DTE
link.
disc_tx contains the count of unnumbered
DISC frames transmitted
by X.25 circuit cct.
DISC frames terminate the DCE/DTE link.
dm_rx contains the count of unnumbered
DM (Disconnected Mode)
frames received by X.25 circuit cct.
DM frames indicate that the sending
node is logically disconnected.
dm_tx contains the count of unnumbered
DM (Disconnected Mode)
frames transmitted by X.25 circuit cct.
DM frames indicate that the send-
ing node is logically disconnected.
Management Information Base Variables
x25: X.25 Information Base
18-106