HP (Hewlett-Packard) 200 Network Router User Manual


 
Not receiving seq num on MI enquiry
Meaning: For the indicated frame relay circuit, the other side of the frame relay
interface is issuing status enquiry messages with last received keep-alive
sequence numbers that are not as expected. That is, this sequence
number is not the last sequence number we sent. This indicates that the
other side i s not receiving our status message response.
out of memory for IP to V.25 bis mapping
Meaning: Either too many IP-mapping records have been configured, or too many
other configuration parameters have been set.
Action: Check your configuration and reduce the number of configured items.
out of memory for IP to V.25 bis mapping phone #
Meaning: Either too map records have been configured, or too many other
configuration parameters have been set.
Action: Check your configuration file and reduce the number of configured
items.
out of message buffers, pkts dropped
Meaning: There are no message buffers available for V.25 bis. These messages are
used for internal V.25 bis communication. When this occurs, data
packets may be lost or a V.25 bis connection may not be established.
Action: Reduce the overall system resource use. (For example, reduce traffic to
the router.)
Out of sequence keep alive (net)
Meaning: The router is not properly receiving the network keep-alive sequence
number for the identified circuit name. Usually this means the switch
has reset its sequence counter, indicating that it is experiencing
difficulties.
Event Log
Messages
17
Event Log Messages
cct: Circuit Event Messages
17-39